Warmtemachines presteren het de warmte-inhoud van een uerksubstantie gedeeltelijk in kinetische energie om te zetten. Se-
dert 1824, het jaar waarin Sadi Carnot zijn 'Réflexions sur la puissance motrice du Feu' publiceerde, wordt algemeen aangeno-
men, of heeft het als een onomstotelijk wetenschappelijk dogma gegolden, dat warmtemachines slechts vermogen te werken tussen
twee BESTAANDE temperatuurnivo's. Warmte, in de geest van Carnot nog een eterisch soort vloeistof, stroomde, zoals water
onder invloed van gravitationele potentiaalverschillen, alleen
van een hooer temperatuurnivo naar een lager; tijdens die val
was ze in staat arbeicsvermogen af te staan. Ofschoon opererend
vanop een wankele basis, bleek Carnot toch de eeuwig juiste teoretische zet te hebben gerealizeerd! Alle warmtemachines,
werkend tussen dezelfde temperaturen, bezaten een precies gelijk maksimaal rendement. Anders zou een perpetuum mobile van de tweede soort kunnen worden gekonstrueerd, of een schip, aldus Char-
les Fabry, dat, zijn energie ontlenend aan zeewater, bij wijze
van spreken ijs in zi jn zog zou achterlaten.
Ettelijke uitvinders hebben in de loop der tijden werktuigen voorgesteld waarmee ze het Carnot-rendement claimden te kunnen overtreffen, of waarmee ze inbreuk wilden maken op de tweede termodinamische wet. De fizikus had er gewoonlijk weinig moei-
te mse de vinger op de voor het werkstuk fatale vergissing te
leggen! Uiteindelijk triomfeerden telkens Carnot, Kelvin, Clau-
sius, Fabry...
<EMI ID=1.1>
moed te beweren ten langen leste toch een installatie te heb-
<EMI ID=2.1>
verrichten dan de oceanen afkoelen, zich dientengevolge voortbewegen, en door wrijvingsverliezen het water zijn warmte weder-
<EMI ID=3.1>
volg kortweg infraktrice genaamd, kan het aan, de verstrooide,
de 'gebonden' warmte uit aardmantel, atmosfeer en oceanen te
putten, en die voor mechanische en elektrische arbeid dienstig
te maken.
Nochtans laat de infraktrice Carnot's formule formeel onaan-
<EMI ID=4.1>
<EMI ID=5.1>
het eerst op de juiste uijze uerd geinterpreteerd. Energie heette tot nu toe, alhoeuel onvernietigbaar, niettemin degradeerbaar te uezen, zodat een steeds aanzwellende massa energie voor praktische en nuttige doeleinden onbruikbaar uerd. De infraktrice bewijst dat energie immer 'arbeidsvermogen' blijft, in uelke vorm ze ook voor moga komen. ( Dat valt ook door middel van een 'Gedankenexperiment' teoretisch aan te tonen : de gedissipeerde atmosferische uarmte uordt in het ijle heelal uitgestraald; met behulp van een immense parabolische spiegel zou ze ueer in een brandpunt op aarde kunnen uorden teruggekaatst, daar een ultrahoge temperatuur verwekken. en dus ook volgens klassieke begrippen ueer bruikbaar uorden. ) Arbeidsvermogen vermag in genen dele definitief tot entropische afvalwarmte te veruorden!
De formule van Carnot blijkt bij nadere analieze in feite niet meer dan een redelijke evidentie, een louter verstandelijk afleidbaar principe, geenszins minder elementair dan het sillogisme van de klassieke Aristoteliaanse logika. Bezit immers een uerksubstantie een warmte-inhoud Q en uordt daarvan in
een warmtemachine een deel Q als arbeid afgevoerd, dan blijft
<EMI ID=6.1>
<EMI ID=7.1>
<EMI ID=8.1>
<EMI ID=9.1>
vermogen, gezet op de oorspronkelijk voorhanden kalorische energie, behelst vanzelfsprekend het rendement - in de zin van absoluut rendement - van de machine.
<EMI ID=10.1>
Het feit dat de warmte-inhoud van een ideaal gas direkt evenredin is met de absolute temperatuur transformeert ce formule in de be-
kende vorm
<EMI ID=11.1>
<EMI ID=12.1>
interpretatie , echter iets verraderlijks. Wordt haar afkomst uit het oog verloren, dan schijnt haar boodschap te luiden dat
<EMI ID=13.1>
dreven, wanneer een degelijk rendement wordt aagestreefd. Eigenlijk kan uit de originele formule met gelijk recht worden gede-
<EMI ID=14.1>
zo diep moet uorden gelegd als haalbaar is. Anderhalve eeuw
lang uerd nu aanvaard dat T buiten 's mensen invloed was gelegen, doordat hij in het gun�tigste geval gelijk aan de omgevingstemperatuur moest worden gesteld. Het afoewerkte gas, veelal stoom, uerd dus met uater op omgevingstemperatuur gekoeld, met de bedoeling de einddruk zo laag mogelijk te dwingen.
De finale temperatuur T in Carnot's formule mag echter in geen geval met de omgevingstemperatuur worden geïdentificeerd,
<EMI ID=15.1>
nadat het arbeid heeft geleverd, d.w,z. energie-inhoud aan een. anaer, zodoende geakselereerd, sisteem heeft afoestaan.
ïn de praktijk volstaat het bijgevolg begin- en eindtemperatuur van een gasstelsel zodanig te determineren, dat zijn eind-
<EMI ID=16.1>
tor' ( turbine, plunjer, roterende jet... ) onder de omgevingstemperatuur komt te liggen, om precies van de omgevingswarmte
<EMI ID=17.1>
temperatuur voor te verwarmen.
<EMI ID=18.1>
Bekijken ue echter vooreerst een klassieke centrale. Ook die
<EMI ID=19.1>
zelfs in verband met de rendementsberekening daarvan oient vooraf orde op zaken te uorden gesteld.
Draait een centrale op hoge-druk-stoom van bv. 900 K en be-
<EMI ID=20.1>
klassieke redenering, haar rendement ideaal, dus maksimum, tot
<EMI ID=21.1>
<EMI ID=22.1>
Water uordt in een centrale in werkelijkheic opgewarmd vertrekkende van ongeveer omgevingstemperatuur, en bijgevolg moet
ce kuantiteit verkregen mechanische ( resp. elektrische ) energie vergeleken uorden met de hoeveelheid aan het uater TOEGEVOEGDE chemische of nukleaire ... hitte! Op die uijze uordt het relatieve rencement bepaald : important is dan de temperatuur aan
<EMI ID=23.1>
<EMI ID=24.1>
<EMI ID=25.1>
In deze gelijkheid staat de in arbeid getransformeerde uarmte
<EMI ID=26.1>
<EMI ID=27.1>
<EMI ID=28.1>
dement vertelt : zoveel kalorieën ingestoken, zoveel uitgehaald. Het absolute daarentegen : zoveel totaal voorhanden, zoveel uitgehaal d.
<EMI ID=29.1>
500 K, dan is bij een begintemperatuur van 900 K :
<EMI ID=30.1>
maar het absolute rendement bedraagt niat meer dan :
<EMI ID=31.1>
<EMI ID=32.1>
gedeelde uarmte in arbeid wordt omgezet, raakt 33,4% via koeluater en koeltorens in de omgeving gedissipeerd en verloren.
<EMI ID=33.1> .gaan. De restwarmte kan net zo goed worden gerecikleerd.
Koelwater kan met de stroomrichting van de stoom mee in de verlengde uitlaat van de turbine gesproeid en verstoven, zodanig dat de stoom wordt opgelost, afgekoeld en gekondenseerd tot
bv. 50 [deg.]C ( juist onder kooktemperatuur bij de daar heersende onderdruk ).
<EMI ID=34.1>
<EMI ID=35.1>
<EMI ID=36.1>
<EMI ID=37.1>
koud, terug' naar de koeluaterpompen stroomt. De kondensors en motoren van de warmtepompen worden gekoeld met het gedeelte eindwater dat voor nieuwe stoomvorming was bestemd ( voorverwarming ). INTERN UARMTETRANSPORT neemt dus de plaats in van koeling aan
de koudebron, de omgeving, de eksterne wereld. Op die manier . gaat geen uarmte verloren.
Al uare het rendement per ciklus beschouwd al minder dan gebruikelijk, daar werkstof en koelmiddel steeds worden qerecikleerd, benadert het totale rendement tenslotte 100%.
<EMI ID=38.1>
dan-moet ( nog steeds met betrekking tot bovenstaand voorbeeld ) 'slechts zowat 15% van de opgewekte elektriciteit ter aandrijving
<EMI ID=39.1>
<EMI ID=40.1>
pas ten' volle haar naam, wanneer geheel' ( of ten minste zo goed als geheel ) van verhitting boven de omgevingstemperatuur wordt
<EMI ID=41.1>
<EMI ID=42.1>
omgeving als warmtebron wordt aangewend ( geen koudebron vandoen )! <EMI ID=43.1>
druk uordt over een kinetische receptor geleid, zodat die uarmteinhoud kwijtraakt. De druk uordt zodanig bepaald dat de eindtsmperatuur.van het a�gewerkte uitlaatgas zo dicht mogelijk bij de kondensatietemperatuur komt te liggen. Verscheidene metoden staan ter beschikking om de uerksubstantie ter opneming in de arbeidsciklus wederom te appreteren.
I. Het laaggradige gas uordt ( zoals boven de stoom ) met vloei-
bare koudere werksubstantie besproeid en nacien verdeeld over heaters ( warmtewisselaars aan omgeving blootgesteld ) en eindvloeistofverzamelvaten ( waarin warmtepompen ).
2. Het laaggradige gas uordt door middel van een kompressor afge-
<EMI ID=44.1>
<EMI ID=45.1>
tepomp (en) kan daartoe noodzakelijk zijn ( warmtetransport intern naar koude vloeistof juist achter pomp ).
<EMI ID=46.1>
I. Bij diskontinue of batchgeuijze operatie is
de warmtewisselaar in principe een hoge-druktoren-vat waarop een zware vlotter drijft
( die nauwkeurig afsluit tegen de wanden ).
De naar beneden toe verlengde zijkanten van de vlotter zorgen door het erop aangebrachte labirint voor afdichting en het kreëren van de oorspronkelijke koude-vloeistof-ruimte.
Naarmate de vlotter stijgt ( doordat vloeistof in gas raakt omgezet ) kan nieuwe vloei-
<EMI ID=47.1>
<EMI ID=48.1>
benut.
Is de inhoud van de toren eenmaal op omgevingstemperatuur, dan wordt de uitlaatklep naar de kinetische recep.tor geopend. Het op temperatuur en druk gekomen gas levert.arbeid, koelt dientengevolge af en is klaar voor likuefaktie.
<EMI ID=49.1>
uitgerokken tubulair sisteem gepompt, dat aan de omgeving
<EMI ID=50.1>
gelijk waar ter wereld.
De beschreven procedures en installaties bewerken dat Carnot's en andere arbeidscikli tot beneden de omgevingstemperatuur wor-
<EMI ID=51.1>
<EMI ID=52.1>
recikleren.
.In Carnot's formule ligt het feit uitgedrukt dat de hoeveelheid arbeid die geleverd werd gelijk is aan de hoeveelheid warmte die verdween. Het absolute rendement bedraagt dan ook :
Het is een misopvatting dat natuurlijk voorhanden koelmiddel onontbeerlijk zou zijn ( zodat men van de dmgevingstemperatuur
<EMI ID=53.1>
een receptor over te dragen.
Onmisbaar voor een warmtemachine blijkt primair een gepaste aanvangsdruk en een lage-druk-nivo aan de uitlaat van de ekspansiemotor!
De drukdifferentie is essentieel! Het temperatuurverschil wordt geschapen!
Een gas op uiterst hoge temperatuur, maar op omoevingsdruk
is niet in staat arbeid te leveren. Het verwarmt slechts zijn omgeving. Een gas, ook al is het op omgevingstemperatuur, vermag arbeid te leveren ( zooat het afkoelt ), als het zich onder overdruk bevindt!
De temperatuurdaling van een arbeidend gas wordt veroorzaakt :
I. in mindere mate door de versnelling van het gas ( omzetti ng
van uarmte in stromings- of kinetische energie );
2. door rekuperatie van bindingsenergie die bij samendrukking
was afgegeven ( omzetting van warmte in potentiële energie
op molekulair nivo );
3. door omzetting van uarmte in arbeid ( in eerste instantie
overgedragen op een kinetische receptnr ).
Zaak is het bijgevolg de omstandigheden zodanig uit te kienen cat de werksubstantie door adiabatische arbeidleverende ekspansie zo naast mogelijk bij haar kondensatiepunt komt te liggen. Het warme opgedrukte gas moet dus eigenlijk een likue-
<EMI ID=54.1>
daling sterk dominerend coor levering van arbeid wordt bewerkt. De resternde warmte wordt ofwel afgevoerd naar de koudebron
( omgeving ) ofuel intern getransporteerd naar de koude vloeistof; juist na de uitlaat van de koude-vloeistof-pomp ( die
<EMI ID=55.1>
ekspansiemachine voert ),
De installatie voor omzetting van omgevingswarmte in bruikbare energie valt dus prindipieel als volgt te schetsen :
<EMI ID=56.1>
Oereenkomstig ziet de traditionele centrale eruit als volgt :
<EMI ID=57.1>
De tweede hoofdwet kan in het licht van dit beeld een verhelderende reformulering uorden verstrekt.
Hoe dan ook kan geen kinetische receptor uorden ontworpen of gebouud, in staat onder enigerlei omstandigheden van een uerkmedium zo efficiënt of in die mate uarmte af te nemen dat het voldoende dicht bij het kondensatiepunt komt te liggen, opdat voor
<EMI ID=58.1>
uorden aangewend.
<EMI ID=59.1>
uorden ontworpen, die meer energie afgeeft dan ze verbruikt, zonder dat een deel van de kalorische energie naar de omgeving uordt afgevoerd.
Deze uitspraken zijn duidelijk onjuist, uant met behulp van uarmtepompen kan met gering energieverbruik voldoende uarmte intern uorden getransporteerd om kondensatie van een uerkmedium te bekomen.
De infraktrice is in verschillende vormen bestaanbaar. Een ervan, geschikt als kleinschalige motor, vertoont p rincipieel
<EMI ID=60.1>
In deze installatie ( zuigertiepe ) uordt de grote zuiger ueg en ueer beuogen door afwisselend langs links en rechts
<EMI ID=61.1>
gas komt in een reservoir terecht dat door een warmtepomp bijkomend wordt gekoeld. De kondensor van de warmtepomp dient
<EMI ID=62.1>
De koude vloeistof uordt uit het koude reservoir weggepompt door een kleine zuiger, die de vloeistof via warmtewisselaars, liggend aan de omgeving, in het hoge-druk-reservoir transporteert.
Vanuit het hoge-druk-reservoir en via de oververhitter ontspant het gas weer over de grote cilinder naar het lage-drukreservoir. De ciklus is kompleet.
<EMI ID=63.1>
een gasturbine en een centrifugaalpomp e.d. worden vervangen.
In een andere uitvoering uordt de ingang van een kompressor aan de uitgang van een turbine gekoppeld ( op tekening mechanisch; in werkelijkheid kan dat natuurlijk ook elektrisch gebeuren ).
De turbine kan vervancen worden door een zuiger-ekspansie- machine ( cfr. likwefaktie van gassen ).
De kompres�or zorgt voor een goede onderdruk aan de uitgang
van de turbine. Het samengedrukte gas kondenseert in het koudevloeistof-vat. Het uitlaatgas van de turbine kan eventueel al vooraf worden gekoeld door de chiller van een warmtepomp.
Met een gaspomp wordt uit het kouce-vloeistof-vat gas afgezo gen en in kontakt gebracht met de koude vloeistof, die door de
<EMI ID=64.1>
de turbine toe wordt gedrukt. Warmte wordt aldus intern getransporteerd. De gaspomp werkt als warmtepomp.
<EMI ID=65.1>
ENERGIE
bestaat essentieel uit :
1. GENERATOR gekoppeld aan ekspansiemotor ( turbine, cilinder
met zuiger... )
<EMI ID=66.1>
3.(fac.) KOMPRESSOR: tussen door warmtetransport ( warmtepomp )
gekoelde uitlaat van de ekspansiemotor en het koude-vloeistofvat; verlaagt de druk aan de uitlaat van de ekspansiemotor
en verhoogt die in het koude-vloeistof-vat, zodat kondensatie
<EMI ID=67.1>
<EMI ID=68.1>
pomo,
5. HOOFDPOMP ( koude-vloeistof-pomp ) : tussen uitlaatvalve
van koude-vloeistof-vat en warmtewisselaar met omgeving,
<EMI ID=69.1>
van ekspansiemotor,
<EMI ID=70.1>
ze ter kondensatie in kontakt met koude vloeistof juist na de hoofdpomp en voert ze terug naar het koude-vloeistofvat;
zorgt dus voor ekstra koeling ),
<EMI ID=71.1>
takt met hv. turbine-uitlaat, kondensor in kontakt met koude vloeistof na hoofdpomp.
Turbine en rotatiepompen kunnen eventueel gesubstitueerd worden doo r ekuivalente apparatuur van het zuinertiepe.
<EMI ID=72.1>
selaar met branders, kernreaktor enz.
3 en 7 zijn fakultatief, d.w.z. des evallend redundant bij
<EMI ID=73.1>
Heat machines are able to partially convert the heat content of an uerk substance into kinetic energy. Se-
Thirteen 1824, the year in which Sadi Carnot published his 'Reflexions sur la puissance motrice du Feu', is generally accepted
it has been, or has it been argued, as an irrefutable scientific dogma, that heaters only work between
two EXISTING temperature levels. Heat, in Carnot's mind another ethereal kind of liquid, flowed like water
under the influence of gravitational potential differences, alone
from a whore temperature level to a lower one; during that fall
she was able to give up labor power. Although operating
on a shaky basis, Carnot turned out to have realized the eternally correct theoretical move! All heaters,
operating between the same temperatures, had exactly the same mashimal efficiency. Otherwise, a perpetual motion machine of the second kind could be constructed, or a ship, Charles said.
les Fabry, that, deriving its energy from seawater, by way of example
of speaking would leave ice in its wake.
Over time, many inventors have proposed tools to claim to exceed Carnot's returns, or to violate the second termodinamic law. The fizikus usually had little trouble
to finger on the mistake that is fatal to the workpiece
to lay! In the end, Carnot, Kelvin, Clau-
sius, Fabry ...
<EMI ID = 1.1>
courage to claim to have an installation at long last
<EMI ID = 2.1>
then the oceans cool, consequently propel themselves, and the water regains its heat through friction losses
<EMI ID = 3.1>
follow briefly called infraktrice, can it handle the scattered,
the 'bound' heat from the mantle, atmosphere and oceans too
wells, and useful for mechanical and electrical work
to make.
However, the infra-trice formally leaves Carnot's formula untouched.
<EMI ID = 4.1>
<EMI ID = 5.1>
interpreted correctly for the first time. Until now, energy had been called indestructible, nevertheless degradable, so that an ever-expanding mass of energy was rendered useless for practical and useful purposes. The infra trice proves that energy always remains 'energy capacity', in whatever form they occur. (This can also be demonstrated theoretically by means of a 'Dispute Experiment': the dissipated atmospheric heat is radiated into the thin universe; with the help of an immense parabolic mirror it could be reflected back into a focal point on earth, since an ultra-high temperature and therefore also usable according to classical terms.) Labor capacity is in no way wholly capable of being transformed into entropic waste heat!
Carnot's formula, on closer analysis, in fact turns out to be no more than a reasonable evidence, a purely intellectually derivable principle, by no means less elementary than the sillogism of classical Aristotelian logic. After all, an uc substance has a heat content Q and is inherent in it
a heat machine removes part Q as labor, then remains
<EMI ID = 6.1>
<EMI ID = 7.1>
<EMI ID = 8.1>
<EMI ID = 9.1>
power, put on the originally available caloric energy, naturally includes the efficiency - in the sense of absolute efficiency - of the machine.
<EMI ID = 10.1>
The fact that the heat content of an ideal gas is directly proportional to the absolute temperature transforms the formula into the
known form
<EMI ID = 11.1>
<EMI ID = 12.1>
interpretation, however, something insidious. Her sight is lost, her message seems to be that
<EMI ID = 13.1>
when a good return is sought. Actually, from the original formula with equal right can be
<EMI ID = 14.1>
as deep as possible. A century and a half
It is now long accepted that T was outside of man's influence, in that it had to be equated with the ambient temperature in the most favorable case. The waste gas, usually steam, is therefore cooled with ambient water at an ambient temperature, with the intention of forcing the final pressure to be as low as possible.
However, the final temperature T in Carnot's formula should in no case be identified with the ambient temperature,
<EMI ID = 15.1>
after it has done work, i.e. energy content to one. Anaer, thus agitated, has lost sistema.
in practice, it is therefore sufficient to determine the initial and final temperature of a gas system in such a way that its final
<EMI ID = 16.1>
tor '(turbine, plunger, rotating jet ...) is below the ambient temperature, in order to get exactly from the ambient heat
<EMI ID = 17.1>
preheat temperature.
<EMI ID = 18.1>
First, however, consider a classic control panel. That too
<EMI ID = 19.1>
even in connection with the calculation of the yield, it is necessary to put things in order in advance.
Runs a central plant on high-pressure steam of, for example, 900 K and
<EMI ID = 20.1>
classical reasoning, its yield ideal, so maksimum, tot
<EMI ID = 21.1>
<EMI ID = 22.1>
Water is heated in a power station in reality from approximately ambient temperature, and therefore must
The quantity of mechanical (or electrical) energy obtained is compared with the amount of chemical or nuclear heat ADDED to the water! The relative rencement is determined in this way: the temperature is then important
<EMI ID = 23.1>
<EMI ID = 24.1>
<EMI ID = 25.1>
In this equality is the heat transformed into labor
<EMI ID = 26.1>
<EMI ID = 27.1>
<EMI ID = 28.1>
dement tells: so many calories put in, so much cut out. The absolute, on the other hand: so much total available, so much use d.
<EMI ID = 29.1>
500 K, then at an initial temperature of 900 K:
<EMI ID = 30.1>
but the absolute return is not more than:
<EMI ID = 31.1>
<EMI ID = 32.1>
shared heat is converted into labor, 33.4% becomes dissipated and lost through cooling water and cooling towers in the surrounding area.
<EMI ID = 33.1>. The residual heat can just as easily be recycled.
Cooling water can be sprayed and atomized in the extended outlet of the turbine with the direction of flow of the steam, such that the steam is dissolved, cooled and condensed to
eg 50 [deg.] C (just below boiling temperature at the prevailing negative pressure).
<EMI ID = 34.1>
<EMI ID = 35.1>
<EMI ID = 36.1>
<EMI ID = 37.1>
cold, flows back to the cooling water pumps. The condensers and motors of the heat pumps are cooled with the end water part that was used for new steam formation (preheating). INTERNAL HEAT TRANSPORT therefore takes the place of cooling
the cold spring, the environment, the magpie world. In this way . no heat is lost.
Although the efficiency per cycle is considered less than usual, since the active material and coolant are always recycled, the total efficiency finally approaches 100%.
<EMI ID = 38.1>
then (still with respect to the above example) "only about 15% of the electricity generated must be propelled
<EMI ID = 39.1>
<EMI ID = 40.1>
only 'full name', when whole '(or at least as good as whole) of heating becomes above ambient temperature
<EMI ID = 41.1>
<EMI ID = 42.1>
environment is used as a heat source (do not use a cold source)! <EMI ID = 43.1>
pressure is passed over a kinetic receptor, so that it loses heat content. The pressure is determined so that the final temperature of the exhaust gas exhausted is as close as possible to the condensation temperature. Several methods are available to once again size the uerk substance for inclusion in the work cycle.
I. The low-grade gas flows (as above the steam) with liquid
bare colder working substance sprayed and nacien distributed over heaters (heat exchangers exposed to the environment) and final liquid collection vessels (in which heat pumps).
2. The low-grade gas is discharged by means of a compressor.
<EMI ID = 44.1>
<EMI ID = 45.1>
pump (s) may be necessary for this (heat transfer internally to cold liquid just behind the pump).
<EMI ID = 46.1>
I. In case of discontinuous or batch operation
the heat exchanger is basically a high-pressure vessel barrel on which a heavy float floats
(which closes accurately against the walls).
The downwardly extended sides of the float provide sealing and the creation of the original cold liquid space by means of the applied labirint.
As the float rises (because liquid turns into gas), new flow can
<EMI ID = 47.1>
<EMI ID = 48.1>
utilized.
Once the contents of the tower have reached ambient temperature, the outlet valve to the kinetic receiver is opened. The gas, which has reached temperature and pressure, provides work, consequently cools and is ready for liking.
<EMI ID = 49.1>
stretched tubular sistem pumped to the environment
<EMI ID = 50.1>
anywhere in the world.
The described procedures and installations ensure that Carnot's and other operating cycles are kept below ambient temperature
<EMI ID = 51.1>
<EMI ID = 52.1>
recycle.
Carnot's formula expresses the fact that the amount of labor supplied equals the amount of heat that disappeared. The absolute return is therefore:
It is a misconception that naturally available coolant would be indispensable (so that the ambient temperature is taken into account
<EMI ID = 53.1>
to transmit a receptor.
An essential initial pressure and a low pressure level at the exhaust of the electric tension motor is indispensable for a heat machine!
The pressure differential is essential! The temperature difference is created!
A gas at an extremely high temperature, but at war pressure
is unable to provide labor. It only heats its environment. A gas, even if it is at ambient temperature, is able to provide work (so that it cools down) when it is under overpressure!
The temperature drop of a working gas is caused:
I. to a lesser extent by the acceleration of the gas (conversion
of heat in flow or kinetic energy);
2. by recuperation of binding energy produced by compression
had been released (conversion of heat into potential energy
at molecular level);
3. by converting heat into labor (initially
transferred to a kinetic recipe no).
It is therefore important to design the circumstances in such a way that the working substance becomes as close as possible to its condensation point by means of adiabatic labor-producing stress. The hot pressed gas should therefore actually have a
<EMI ID = 54.1>
fall strongly dominating when labor supply is worked on. The remaining heat is either dissipated to the cold source
(environment) or internally transported internally to the cold liquid; just after the outlet of the cold liquid pump (die
<EMI ID = 55.1>
tension machine),
The installation for converting ambient heat into usable energy can therefore be sketched as follows:
<EMI ID = 56.1>
Accordingly, the traditional power plant looks like this:
<EMI ID = 57.1>
In the light of this picture, the second main law can provide an enlightening reformulation.
In any event, no kinetic receptor can be designed or constructed, capable of drawing heat so efficiently or to such an extent under any circumstance of a timepiece that it is sufficiently close to the condensation point that for
<EMI ID = 58.1>
used.
<EMI ID = 59.1>
designed to deliver more energy than it consumes without diverting some of the caloric energy into the environment.
These statements are clearly incorrect. With the help of heat pumps, sufficient heat can be transported internally with low energy consumption to obtain condensation of an uerk medium.
The infra trice is available in various forms. One of them, suitable as a small-scale engine, exhibits principle
<EMI ID = 60.1>
In this installation (piston type), the large piston is bent and bent by alternating left and right.
<EMI ID = 61.1>
gas enters a reservoir that is additionally cooled by a heat pump. The heat pump's condenser serves
<EMI ID = 62.1>
The cold fluid is pumped out of the cold reservoir by a small piston, which transports the fluid into the high-pressure reservoir via heat exchangers, which are located close to the environment.
From the high-pressure reservoir and via the superheater, the gas relaxes again over the large cylinder to the low-pressure reservoir. The cycle is complete.
<EMI ID = 63.1>
a gas turbine and a centrifugal pump etc. are replaced.
In another embodiment, the input of a compressor is coupled to the output of a turbine (on the drawing mechanically; in reality, of course, this can also be done electrically).
The turbine can be replaced by a piston-electric tensioning machine (cf. licking effect of gases).
The compress provides good negative pressure at the exit
of the turbine. The compressed gas condenses in the coolant vessel. The exhaust gas from the turbine can possibly be pre-cooled by the chiller of a heat pump.
With a gas pump, gas is extracted from the cold liquid vessel and brought into contact with the cold liquid, which is
<EMI ID = 64.1>
the turbine is pressed. Heat is thus transported internally. The gas pump works as a heat pump.
<EMI ID = 65.1>
ENERGY
consists essentially of:
1. GENERATOR coupled to voltage motor (turbine, cylinder
with piston ...)
<EMI ID = 66.1>
3. (fac.) KOMPRESSOR: in between heat transfer (heat pump)
cooled exhaust of the tension motor and the cold liquid vessel; lowers the pressure at the exhaust of the tension motor
and increases it in the cold liquid vessel, so that condensation
<EMI ID = 67.1>
<EMI ID = 68.1>
pomo,
5. MAIN PUMP (cold liquid pump): between exhaust valve
of cold-liquid vessel and heat exchanger with environment,
<EMI ID = 69.1>
of tension motor,
<EMI ID = 70.1>
it condenses in contact with cold liquid just after the main pump and returns it to the cold liquid vessel;
thus provides ecstra cooling),
<EMI ID = 71.1>
stroke with sl st. turbine outlet, condenser in contact with cold liquid after main pump.
Turbine and rotary pumps may optionally be substituted by equivalent fuel economy equipment.
<EMI ID = 72.1>
burner with burners, nuclear reactor, etc.
3 and 7 are optional, i.e. optionally redundant
<EMI ID = 73.1>